Showing posts with label bosch hot water. Show all posts
Showing posts with label bosch hot water. Show all posts

Friday, 26 August 2016

The wait is over, introducing the Bosch OptiFlow Continuos Flow water heaters

It has been quietly spoken about for some time amongst many of Adelaide’s most trusted plumbing firms amongst companies who are in the know when it comes to hot water, firms such as Mayfair Plumbing and Gasfitting and the Hot Water Specialists of Adelaide 1800MYHOTWATER.  It’s the highly anticipated introduction of the brand new OptiFlow technology from Bosch.

The brand new brushed metal casing along with OptiFlow combustion management and probably what will the most appealing factor, wireless Blue Tooth connectivity to your smart phone (compatible with Iphone’s and Androids) via the app which you can down load.  What is the benefit of having a wireless hot water service?  It’s simple no more control pads and messy wiring (can still be installed with up to 3 controllers if required), so you can now be anywhere within the home and dial up the temperature of your hot water via your phone, how amazing!

But wait there’s more, this new technology from Bosch is available in three different sized models starting off at the 16L, then there’s the 20L model and at the top end of the scale there is the 26L model for the larger home or office.  Of course the new units are compatible to both natural gas and lpg.

OptiFlow combustion management allows the energy rating of the new units to achieve a 6-star energy rating meaning it will now cost you less to heat the water from your continuous flow system, the list of benefits just keeps growing.

If you would like to discuss your options regarding the brand new range of hot water services from Bosch why not send us an email at plumbers@mayfairplumbing.com.au or call us for free on 1800MYHOTWATER and take a moment to view the video below.

Saturday, 17 October 2015

Dissecting battery ignited bosch hot water services 13b and 16b models

Do you own a Bosch 13B or 16B hot water service?  Are you having problems with it?  Are you getting cold water instead of hot?  Or perhaps its just not igniting the natural or lp gas?  These are just a couple of the symptoms that relate to a fault with your Bosch Battery Ignited Hot Water Service, in this weeks blog post we will dissect a few of the common symptoms of a problematic bosch battery ignition hot water service and what are the required steps for a licensed plumber to fix your hot water system.
example of a Bosch 13b hot water service flaming up properly after the water section has been overhauled
To start with if you have a Bosch 13b or 16b hot water service which will not ignite the gas there are most likely 2 things which will be wrong.  Either the 2 x D size batteries have gone flat which assist in the ignition process or the ignition control pack has packed it in.  If it is just the batteries this will be a relatively cheap fix at approx $10 on parts, but if it is the ignition control pack then this will be a bit more pricey at approx $250 for a genuine bosch ignition pack.

If your bosch 13b or 16b hot water service is only sometimes igniting the ignition module could be out of alignment and this is a relatively simple task to be under taken by a licensed plumber which initially requires no parts.  If how ever this still does not resolve the problem it can then lead to the ignition pack needing to be replaced.

Are you noticing significant temperature spikes whilst in the shower, fluctuations from warm water to scalding hot?  If this problem has only just recently occurred and you have not replaced a shower head then this is a very go indicator that the water section for the bosch 13b or 16b is in need of an overhaul.  Typically parts for this job start at approx $85 for the diaphragm and then approx $75 for the other parts which make up the complete water section over haul, your plumber would advise at the time as to if both repair kits are needed or just the one.  If it is established that water section is in good condition and the problem is still occurring the gas valve may need re-greasing, no parts are needed but it can be labour intensive (your licensed plumber will advise).  When considering taking the step of dismantling the bosch 13b or 16b to re-grease the gas valve components the age of the hot water service should be taken into consideration as it may be a better option to just upgrade, but your licensed master plumber from Mayfair Plumbing and Gasfitting would assist with these decisions at the time.

If you would like to discuss the operation of your Bosch Battery Ignition Hot Water Service with an accredited hot water repairer why not visit us online at https://www.pinterest.com/masterplumer/ or feel free to contact us via our emergency plumbing cell +61429361819